Page 8 of 12
fearless
Installation guide
Now carefully stow the cable in the housing. Make sure that the
push-button
(on the inside of the housing) is free
(not covered by the black cable).
Also make sure that you close the housing in such a way that the
power
connection
of the board is at the
corresponding opening of the housing
.
Now mount the housing onto the metal plate as follows:
Now continue with software setup.
Step 1:
Place the housing from bottom to top. Make sure
that the metal plate is outside the clamp of the
housing.
Step 2:
Hook the clamps from the housing to the metal
plate. Press the casing together to connect it to
the metal plate at the top edge.
Step 3:
Now press the housing onto the metal plate until it
clicks into place.
