CognitiveTPG DLXi User Manual Download Page 25

Page: 25 / 28

USB A Port Utilization

Changing Printer Settings Using a USB Flash Drive

1. Create a folder on the USB flash drive at the root level named

Cognitive

2. Inside the

Cognitive

folder create a folder named

Settings

3. Place the desired CPL text files into the

Settings

folder.

4. Turn the printer ON and verify the

POWER

and

READY

lights are green.

5. Insert the USB flash drive into the USB A port on the back of the printer.

READY

light will flash quickly while the file loads.

6. When the

READY

light remains solid green remove the USB Flash Drive.

Loading Firmware Using a USB Flash Drive

1. Create a folder on the USB flash drive at the root level named

Cognitive

2. Inside the

Cognitive

folder create a folder named

Firmware

3. Place the desired firmware revision into the

Firmware

folder.

4. Turn the printer ON and verify the POWER and READY lights are green.

5. Insert the USB flash drive into the USB A port on the back of the printer. The

READY light will flash red during firmware installation.

6. When READY light remains solid green, turn the printer off and remove the

USB Flash Drive.

Loading Formats Using a USB Flash Drive

1. Create a folder on the USB flash drive at the root level named

Cognitive

2. Inside the

Cognitive

folder create a folder named

Objects

3. Place the desired Stored Label Formats into the

Objects

folder.

4. Turn the printer on and verify the

POWER

and

READY

lights are green.

5. Insert the USB flash drive into the USB A port on the back of the printer.

READY

light will flash red during firmware installation.

6. When

READY

light remains solid green, turn the printer off and remove the

USB Flash Drive.

HELPFUL TIP: PRINTER WILL LOAD OBJECTS FILES IN ALPHABETICAL ORDER.

Data Trace Using a USB Flash Drive

Capture all data sent to the printer onto the USB flash drive. This capability is used for

advanced troubleshooting. Contact Technical Support for procedure.

NOTE: CHANGING

VARIABLE PRINTER

SETTINGS WITH THE

USB FLASH DRIVE

REQUIRES USE OF

THE COGNITIVE

PROGRAMMING

LANGUAGE. FOR

MORE INFO ON

PROGRAMMING

WITH CPL PLEASE

REFERENCE THE CPL

PROGRAMMERS GUIDE.

IMPORTANT! WHEN

USING USB FLASH

DRIVE, PRINTER WILL

ONLY UPGRADE TO

A NEWER FIRMWARE

REVISION.

CAUTION! REMOVING

USB FLASH DRIVE

WHILE FIRMWARE

IS LOADING COULD

DAMAGE THE PRINTER.

Summary of Contents for DLXi





























Search results

Summary of Contents for DLXi

Reviews:

Related manuals for DLXi

Brands by name

Popular brands

CognitiveTPG DLXi, User Manual

Search results

Summary of Contents for DLXi

Reviews:

Related manuals for DLXi

Brands by name

Popular brands