10 Xpand 15 Quick Reference Guide
Xpand 15 Quick Reference Guide 11
Assembly Instructions
Attach the FOVE-bracket to the bar light bracket using two M8x25 mm flat
head cap screws, two M8 flat washers and two M8 self locking hex nuts.
1
2
Mount the camera lens to the reader, using the steps provided in the
quick reference guide for your reader, and then place the gasket to
the front of the reader by carefully sliding it over the lens.
3
Attach the reader to the bracket subassembly using four M3x10 mm
flat head cap screws.
For attaching a
DataMan 503,
please see
page 18 below.
i
Torque limit: 10
N-m (7.37 Lb-ft).
1
3
4
2
Tighten in
sequence.
Torque limit:
35 N-cm (3.1
Lb-In).
