18 Xpand 15 Quick Reference Guide
Xpand 15 Quick Reference Guide 19
Remove the red dust cover and then, mount the DataMan 503 using the
M4x20 mm screws.
6
Place the DM503 gasket on the FOVE-bracket sliding it over the M4x20 mm
screws, and then slide the spacers on the screws.
5
Close the sliding lens cover.
7
Assembly Instructions (continued)
Note that the reader can be mounted in two different orientations, as
shown in the images below:
Buttons facing down
Buttons facing up
1
3
4
2
Tighten in
sequence.
Torque limit:
1.5 N-m (1.1
Lb-Ft).
Close the sliding lens cover, and then secure it using the M3 wing
nut, as shown in step 9 on page 16.
8
9
Check focus and adjust if necessary as described on page 22. To
adjust focus, open the sliding lens cover first. When the focus has
been set, close the sliding lens cover as described in step 7 on page
