14 Xpand 15 Quick Reference Guide
Xpand 15 Quick Reference Guide 15
Attach the bracket subassembly with the reader to the housing
subassembly using four M4x10 mm flat head cap screws. Make sure that
the tab on the sliding lens cover aligns with the M3x25 mm screw on the
FOVE-bracket.
6
Close the sliding lens cover.
7
A small amount of
extra force might
be needed to have
the lens cover snap
into place properly
against the o-ring in
the FOVE-bracket.
i
Assembly Instructions (continued)
1
3
4
2
Tighten in
sequence.
Torque limit: 90
N-cm (8 Lb-In).
