Connect a VGA Monitor (Optional)
Connect a VGA cable to the vision controller’s VGA port and tighten the connector screws to secure it to the vision
controller. Connect the other end of the cable to the VGA port on the monitor.
Connect USB Devices (Optional)
If connecting a USB mouse, keyboard or mass storage device to the vision controller, connect the USB device to one of
the vision controller's USB ports.
CAUTION
:
Cognex recommends only cold-plugging USB devices; turn the vision controller power off when
connecting or disconnecting USB devices.
Note
: When using the vision controller in an electrically noisy environment, it is important to use USB devices that
are rated for industrial use in the same environment. Most commercially available keyboards, mice, and monitors
are rated for home use but are not designed for, or rated for, use in industrial environments. The use of peripherals
not fully rated for the environment of use can result in impaired system immunity to nearby electrical noise.
21
Installation
Summary of Contents for VC5
Page 1: ...Vision Controller Hardware Manual...
Page 49: ...P N INS 597 0062 01 Rev B...
