Replace the Fuse
The vision controller includes a system fuse to provide over-current protection for the vision controller.
CAUTION
:
The system fuse is the only user-serviceable part in this product. Do not open this product; there are no
other user serviceable parts. Unauthorized modifications may void your warranty.
1. Verify that the 24VDC power supply being used is unplugged and not receiving power.
2. Using a flat-head screw driver, firmly press the fuse capsule in and turn the fuse capsule counter-clockwise by 90
degrees.
3. Remove the fuse capsule from the fuse holder on the vision controller.
4. Remove the fuse from the capsule and replace it with the new fuse.
CAUTION
:
The replacement fuse must be a Littelfuse
®
(Part 0217005) or an equivalent UL-recognized fast-
blow fuse rated at 5A, low breaking capacity, and 250V. It must also be rated for DC operation at a voltage of
24VDC or higher.
5. Insert the fuse capsule into the fuse holder on the vision system. The screw thread should be in a vertical
orientation.
6. Using a flat-head screw driver, firmly press the fuse capsule in and turn the fuse capsule clockwise by 90
degrees.
7. Restore power to the 24VDC power supply and turn it on if necessary.
47
Replace the Fuse
Summary of Contents for VC5
Page 1: ...Vision Controller Hardware Manual...
Page 49: ...P N INS 597 0062 01 Rev B...
