MVS-8100 Hardware Description
3
50
Cognex MVS-8100M Hardware Manual
JP10
3
8100M and
8100M+
1-2
Selects the use for pin 3 on camera port 3.
Cover pins 1-2 for normal use with standard
cameras. (In this state, camera port 3’s pin 3
carries the associated light port’s brightfield
control signal).
Cover pins 2-3 for use with shutter control
cameras such as those listed in
Using Rapid
Reset Cameras
on page 17. (In this state,
camera port 3’s pin 3 carries the rapid reset
trigger signal).
JP11
3
8100M and
8100M+
1-2
Same setting options as JP10, but applies to
camera port 2.
JP12
3
8100M and
8100M+
1-2
Same setting options as JP10, but applies to
camera port 1.
JP13
3
8100M and
8100M+
1-2
Same setting options as JP10, but applies to
camera port 0.
JP14
2
8100M,
style A only
Closed
Reserved for internal use. Do not remove
jumper.
JP15
3
8100M,
style A only
2-3
For revisions A through E:
Reserved for internal use. Jumpers must
cover pins 2-3.
For revision F:
Reserved for internal use. Soldered link
covers pins 1 and 2.
The board revision is the last character (‘X’)
on the barcode label that reads
801-8120-01-
X
.
JP16,
JP17
3
8100M,
style B
1-2
Select the video input filter. Covering pins 1-2
selects a filter that is compatible with the
8100M, style A. Covering pins 2-3 selects a
low pass filter that improves image quality.
8100M+
2-3
Jumper
Block
Number
of Pins
Which
8100?
Default
Setting
Purpose
Table 19. Jumper settings for 8100M and 8100M+
