1
Installing the MVS-8100M
Cognex MVS-8100M Hardware Manual
15
Some of these cameras also have switch settings on the cameras themselves to
support rapid reset mode. See the appropriate section from the following list:
•
Configuring Sony XC-55 Cameras
on page 19
•
Configuring Sony XC-ES50 Cameras
on page 19
•
Configuring Sony XC-55 Cameras
on page 19
9.
If you are using a third and fourth camera, attach the camera port expansion panel
(P/N 300-0177) to the PC’s back panel in an unused bus slot position. Figure 5
shows the camera port expansion panel.
Figure 5.
8100 camera port expansion panel (P/N 300-0177)
Connect the expansion panel’s 30-pin IDC connector to the camera expansion
header on the board (J12), taking care to match up the red edge of the expansion
panel’s ribbon cable with pin 1 on the connector.
Figure 6.
Location of pin 1 on camera expansion header (J12)
Camera 2
Camera 3
No bus connector
Red wire connects to pin 1
Pin 1
J3
J12
