Cognex In-Sight 1721, User Manual

Page: 55 / 156

4 Managing Job Files
In this section…
4.1 About Job Files ........................................................................................................45
4.2 Saving Jobs .............................................................................................................46
4.3 Opening Jobs...........................................................................................................46
4.4 Sharing Jobs Between Readers ..............................................................................47
4.5 Changing the Startup Job ........................................................................................47
4.1 About Job Files
The File tab (Figure 4-1) provides access to job files stored in flash RAM on the wafer
reader.
Figure 4-1: File Tab
The default job file is WAFID00.job. To use the browser interface, at least one job file
must be stored on the wafer reader. This can be the default job or any compatible job that
has been saved using the browser interface. The File tab also lists the job currently being
used by the applet; this job cannot be deleted.
NOTE A WAFID00BC.job file is also loaded on the wafer reader. This job file is identical to the default
WAFID00.JOB, except the default mark type is BC 412.
45