Cognex In-Sight 1721, User Manual

Page: 56 / 156

Section 4: Managing Job Files In-Sight
®
1700 Series Wafer Reader
46
To connect to an In-Sight wafer reader from the browser interface, the wafer reader's
Startup settings must be configured to automatically load the default job, or another job
that has been previously saved using the browser interface.
Advanced users may customize some cells in the spreadsheet of a browser interface-
compatible job. In general, cells may be safely added to the spreadsheet. However, the
predefined functions and formulas in the spreadsheet must not be rearranged, deleted or
otherwise changed in such a way as to break compatibility with the WAFID00.JAR Java
applet. Under no circumstance should the cells in Rows 21 through 74 ever be modified.
These rows are hidden by default.
4.2 Saving Jobs
Jobs must be saved on the wafer reader to preserve changes made to Config and
Options settings. If the job is not saved, all settings changes will be lost when a new job
is opened or the power is cycled on the wafer reader.
To save a new job:
1 Click on the File tab.
2 Click the Save As.… button.
3 Enter a new file name (do not include a directory or subdirectory) in the Save As…
dialog. Job file names can contain up to 15 characters (the .JOB extension will be
added automatically).
4 Click OK to save the Current Job to a new job file, or Cancel .
To save changes to an existing job:
1 Click on the File tab.
2 Click the Save button.
3 Click OK to save the Current Job, or Cancel .
4.3 Opening Jobs
Only job files stored in the wafer reader’s flash memory can be opened using the browser
interface.
To Load an Existing Job from In-Sight Wafer Reader Memory:
1 Click on the File tab.
2 Save changes made to the Current Job, if needed.
3 Highlight a job file in the list.
4 Click the Open button.
5 Click OK in the Open File dialog to load the job, or Cancel .