Cognex In-Sight 1721, User Manual

Page: 57 / 156

In-Sight
®
1700 Series Wafer Reader Section 4: Managing Job Files
47
4.4 Sharing Jobs Between Readers
A job file saved on one wafer reader may be shared with other wafer readers on the
network using FTP to copy the file.
4.5 Changing the Startup Job
By default, the wafer reader is configured to load the WAFID00.JOB automatically after
receiving power. However, after making changes to Config and Options settings and
saving to a different job file, you will want to configure the wafer reader to automatically
load and run that new job at startup.
To change the default startup job for the wafer reader:
1 Click on the Options tab.
2 Click on the System link in the upper-right to access the wafer reader’s System
Settings .
3 Click the Startup tab.
4 Select a new job file to load on startup from the Job list.
5 Click the Save button.