82 DataMan 300 Quick Reference Guide
DataMan 300 Quick Reference Guide 83
DataMan 300 series readers meet or exceed the requirements of all
applicable standards organizations for safe operation. However, as with
any electrical equipment, the best way to ensure safe operation is to
operate them according to the agency guidelines that follow. Please read
these guidelines carefully before using your device.
Regula-
tor
Specification
USA
FCC Part 15, Class A
FDA/CDRH Laser Notice No 50
Canada
ICES-003
European
Commu-
nity
EN55022:2006 +A1:2007, Class A
EN55024:1998 +A1:2001 +A2: 2003
EN60950
EN60825-1
Australia C-TICK, AS/NZS CISPR 22 / EN 55022 for Class A Equipment
Japan
J55022, Class A
FCC Class A Compliance Statement
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC rules. These lim-
its are designed to provide reasonable protection against harmful inter-
ference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. Operation of this
Compliance Statements
i
NOTE: For product support, contact http://support.cognex.com
CAUTION: IP protection is ensured only when all connectors are attached to
cables or shielded by a sealing cap.
Warnings and Notices
LASER LIGHT, DO NOT STARE INTO BEAM: CLASS 2 LASER PRODUCT
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE SERIOUS INJURY
• CAUTION - Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
• Do not attempt to service or repair this product -- return it to Cognex for service.
• Do not permit anyone other than Cognex Corporation to service, repair, or adjust this
product.
• Do not attempt to open or modify this device except as described in this document.
•
Do not direct or reflect laser light toward people or reflective objects.
• Do not operate this device if it is damaged or if the covers or seals are missing or
damaged.
This Laser Product is designated as Class 2 during all procedures of operation.
Wavelength
650 nm
Laser Power for classification
< 1 mW
Beam Diameter
< 3mm at aperture
Divergence
< 1.5 mrad
CAUTION: LED RADIATION - DO NOT VIEW DIRECTLY WITH OPTICAL
INSTRUMENTS - CLASS 1M LED PRODUCT
