Install Software and Documentation and
Connect the Reader
Follow the steps below to connect your reader to power and network:
1.
Connect the I/O+RS232+24V cable to your reader.
2.
For a network connection, connect your reader through an Ethernet cable
to your network.
3.
Connect the cable to a 24V power supply.
To configure a DataMan 260 reader, the DataMan Setup Tool software must be
installed on a networked PC. The DataMan Setup Tool is available from the
DataMan support site:
http://www.cognex.com/support/dataman
1.
After installing the software, connect the DataMan 260 Series reader to
your PC.
2.
Launch the DataMan Setup Tool and click
Refresh
.
3.
Select your DataMan 260 reader from the list and click
Connect
.
26
