MVS-8100D Hardware Description
2
36
Cognex MVS-8100D and CDC Cameras Hardware Manual
Cable 300-0359
Cognex cable 300-0359 connects the MVS-8100D’s parallel I/O port to the 26-pin input
on the Cognex external I/O module. Figure 16 shows the cable.
Figure 16. Parallel I/O cable 300-0359
The HD-15F side of the cable connects to the MVS-8100D’s parallel I/O port. The
HD-26M side of the cable connects to the external I/O module’s HD-26F connector
labeled “Vision Processor.”
Cognex does not support the connection of devices to the pins of cable 300-0359. The
opto-isolation circuitry is added by circuitry in the external I/O module, not in the cable.
The pinout guide for cable 300-0359 in Table 19 is shown only for reference.
Signal Name
Pin on HD-26M
Pin on HD-15F
IN_1
1
9
IN_2
2
4
IN_3
3
10
IN_4
4
5
NC
5
NC
NC
6
NC
NC
7
NC
NC
8
NC
OUT_1
9
13
OUT_2
10
8
OUT_3
11
3
OUT_4
12
12
Table 19. Pin numbering of cable 300-0359
HD-15 F
HD-26M
