1
Installing the MVS-8100D
Cognex MVS-8100D and CDC Cameras Hardware Manual
23
7.
Connect wires from your I/O output devices to the plus and minus terminals of the
output block of the external I/O module. Use the pin numbering in Table 9 as a
guideline. Figure 9 shows the pin numbering for the output terminal block.
Figure 9.
Pin numbering for output terminal block
Table 9 lists the pinout for the output terminal block.
TTL signal from
MVS-8100D
Opto-isolated
and used as
Pin
Number MVS-8100D1
MVS-8100D2
MVS-8100D3
TTL_BI_3
T
OUT 0+
Any output
device
Any output
device
TTL_BI_3– OUT
0–
TTL_BI_4
T
OUT 1+
Any output
device
Any output
device
TTL_BI_4– OUT
1–
TTL_BI_5
T
OUT 2+
Any output
device
Any output
device
TTL_BI_5– OUT
2–
TTL_BI_6
T
OUT 3+
Any output
device
Any output
device
TTL_BI_6– OUT
3–
TTL_BI_7
T
OUT 4+
Any output
device
Any output
device
TTL_BI_7– OUT
4–
TTL_BI_8
T
OUT 5+
Any output
device
Any output
device
TTL_BI_8– OUT
5–
TTL_BI_9
T
OUT 6+
Not used
Any output
device
TTL_BI_9– OUT
6–
Table 9.
Pinout for output block of external I/O option
0+
0–
7+
7–
