18.
4.1.
Place the machine on a flat level and waterproof
surface.
4.2.
Connect to
cold
water feed with connection tube
supplied.
Connection to a closable valve is recommended.
Water pressure shall be 14,5 - 72,5 PSI (1 - 5 bar)
for a correct operation
Water connection
Electrical couplings
The brewer is not reconnectable and may only be installed to the electric supply
network with a voltage that is stated on the brewer and shall be carried out by an
authorized electrician.
A main switch should be assembled before the machine, with a minimum
contact gap of 3mm.
CAUTION!
Connect coffee brewer to a 3-phase socket
All maintenance and installations must be done of an authorized personel.
GB
4. Installation and start.
