CAFÉ ELITE
20
Failure message
Storage / Transport
CLEANING AND CARE
Display shows
Water Level Low
Press Enter
Check if water tap is open.
Then press the
E
button.
Display shows normal, but no drink is coming.
Possible cause of failure:
Mechanical stop in the ingredients canisters or mixer unit.
Action:
Try to find the cause of failure. Clean the mixer system and try again.
Turn off the switch, pull out the electric plug and close incoming water tube.
Long machine storage at temperatures below 0ºC can cause damage of the
machine.
Empty all the water in the machine by opening the service lid between the mixer
bowls. Pull out the hose, remove the plug and let all water pour out. Reassemble
the plug and lid.
Failure messages
which can mostly
be corrected
without any help
from service
company
Preparation for transportation or long term storage
Water Level Low
Press Enter
Summary of Contents for CAFE ELITE
