Coffee Crafters -| Assembly and Installation
12
Installing Hood Support Mast
ITEM#
PART#
DESCRIPTION
QTY
1
A9-RBA-0000
ROASTER BODY ASSEMBLY
1
2
A9-HSM-1100
HOOD SUPPORT MAST
1
3
1/4-20 X 3/4" SCREW
-
4
4
10-32 KEPS NUT
-
2
1.
Slide the mast over the 2 protruding studs on the back of the roaster and secure with 2
–
10/32
keps nuts. Finger tighten only. (Tighten only after the 4 -
¼x20 x ¾” stainless bolts are secured.)
2.
Install 4 -
¼ x 20 x ¾” bolts, washers and lock washers.
3.
Tighten the 2
–
10/32 keps nuts.
4.
Install 2 ¼” x ¼” x 20 carriage bolt through the roaster hopper supp
ort and mast as shown. Finger
tighten with the 1/4” lock washer and wing nut. Do not overtighten.
