INSTALLING EXHAUST BLOWER
Installing Exhaust Blower
1.
Connect the 6” semi rigid flex hose to the right end of the plenum and secure with the 6” hose
clamp.
2.
Position the exhaust blower within 6’ of the plenum and secure the other end of the 6” flex hose
to the side intake of the exhaust blower. Use the 6” hos
e clamp to secure the hose. Make sure to
tighten the hose clamp so the flex hose stays secure during operation.
3.
The exhaust blower comes with a 5” flange on the top discharge outlet. We recommend using
rigid 5” metal ducting from this flange to the outsid
e.
4.
VERY IMPORTANT!
All of the duct joints and seams on the discharge side of the blower must
be sealed with high temperature tape. The discharge exhaust ducts are under pressure and
will leak smoke into the roasting area if not sealed.
NOTE:
elbows.
for
deductions
and
lenghts
outling
below
chart
the
consult
please
runs
longer
For
atmosphere.
outside
the
to
fitting
wall
through
a
access
to
runs
longer
require
may
installations
Some
5.
source.
air
intake
an
without
completely
it
seal
not
to
sure
make
so
cooled
air
is
motor
blower
exhaust
The
wall.
a
of
side
other
the
on
or
enclosure
insulated
an
under
blower
exhaust
the
install
area,
roasting
the
in
noise
reduce
To
18
Coffee
Installation
and
Assembly
Crafters-
