6.3. DMX addressing
Via the dip-switch panel, it is possible to assign a DMX address to the fixture. The address is determined by the sum of the values asso-
ciated with the dip switches set to the on position.
Each unit can be set to use either
10
or
6
address channels.
The default setting of the used DMX address channels is
10
, but using the
Compact 6 ch
function (see section
9. Compact 6 ch
function
), the number of channels used by the units varies from 10 to 6.
Strip Lite Led RGB
features are listed in paragraph
6.4 DMX functions 6 channels (Compact 6 ch)
and
6.5 DMX functions
10 channels.
IMPORTANT NOTE:
the following points are valid for all the instructions which follow.
1.
Setting a dip-switch to the
ON
position activates its function
2.
The
DMX
address may be altered without the need to turn the
Strip Lite Led RGB
off.
The following are examples only for setting DMX addresses.
6.4. DMX functions 6 channels (Compact 6 ch)
channel
function
type of control
effect
1
master dimmer
proportional
adjust luminous output intensity from 0 to 100%
0
- 255
0% - 100%
2
red
proportional
proportional control of the percentage of red colour from 0 to 100%
0
- 255
0% - 100%
3
green
proportional
proportional control of the percentage of green colour from 0 to 100%
0
- 255
0% - 100%
4
blue
proportional
proportional control of the percentage of blue colour from 0 to 100%
0
- 255
0% - 100%
5
no function
step
spare channel, allows the compatibility with RGB-W version
0
- 255
0% - 100%
step
no effect
0
-
9
0% -
4%
proportional
variable speed strobing effect, from slow to fast
10 - 57
4% - 22%
step
stop strobe
58 - 59
23% - 23%
proportional
sequenced pulse effect, slow closing, fast opening
(variable speed pulsing, from slow to fast)
60 - 108
24% - 42%
step
stop strobe
109 - 110
43% - 43%
proportional
sequenced pulse effect, fast closing, slow opening
(variable speed pulsing, from slow to fast)
111 - 159
44% - 62%
step
stop strobe
160 - 161
63% - 63%
proportional
random strobe effect with variable speed from slow to fast and
synchronised colours
162 - 207
64% - 81%
step
stop strobe
208 - 209
82% - 82%
proportional
random strobe effect with variable speed from slow to fast and
non-synchronised colours
210 - 255
82% - 100%
Note 1: this compact version is enabled by switch on the dip (compact 6 ch) of control panel.
decimal
percentage
strobe effect
6
Strip Lite Led RGB
number 2 Address
DMX 007
is obtained by setting dip-switches
1, 2 & 4 to the ON position
ON
256
auto
test
light on
DR1
1
2
4
8 16 32 64 128
Strip Lite Led RGB
number 1 Address
DMX 001
is obtained by setting dip-switch
1 to the ON position
256
auto
test
light on
DR1
ON
1
2
4
8 16 32 64 128
13
English
