4.2. Safety chain
When hanging the
Pin Lite LED
we recommend the use of a safety chain
“C”
affixed to the yoke and to the suspension device. The safety chain
should be either a metal wire rope or a metal chain, both suitably rated for the purpose.
4.3. Adjusting beam direction
The
Pin Lite LED
can be tilted to adjust the beam output. To perform this adjustment, follow the instructions set out below.
1.
Loosen the handle
“D”
located on the side of the projector, thus allowing the inclination to be changed.
2.
Adjust the projector’s tilt.
3.
Refasten the handle
“D”
on the side of the projector.
7
English
Summary of Contents for PIN LITE LED
Page 1: ......
