6.3. DMX addressing
Via the dip-switch panel, it is possible to assign a DMX address to the fixture. The address is determined by the sum of the values asso-
ciated with the dip switches set to the on position.
Each
Pin Lite LED
utilises
6 channels
of
DMX 512
signal for complete control.
IMPORTANT NOTE:
the following points are valid for all the instructions which follow.
1.
Setting a dip-switch to the
ON
position activates its function
2.
The
DMX
address may be altered without the need to turn the
Pin Lite LED
off.
The following are examples only for setting DMX addresses.
6.4. DMX functions
channel
function
type of control
effect
1
master
dimmer
proportional
adjust luminous output intensity from 0 to 100%
0
- 255
0%
- 100%
2
red
proportional
proportional control of the percentage of red colour from 0 to 100%
0
- 255
0%
- 100%
2 (A)
speed
proportional
fade speed between colours of the program selected from channel 6; from
fast to slow (from 1 second to 1 minute)
0
- 255
0%
- 100%
3
green
proportional
proportional control of the percentage of green colour from 0 to 100%
0
- 255
0% - 100%
3 (A)
pause
proportional
control of the pause time between colours (steps) of the program selected
from channel 6; the pause time is adjustable proportionally from 1 second
to 3.30 minutes
0
- 255
0% - 100%
4
blue
proportional
proportional control of the percentage of blue colour from 0 to 100%
0
- 255
0% - 100%
step
no effect
0
- 9
0%
- 4%
proportional
variable speed strobing effect, from slow to fast
10
- 57
4%
- 22%
step
stop strobe
58
- 59
23% - 23%
proportional
sequenced pulse effect, slow closing, fast opening
(variable speed pulsing, from slow to fast)
60
- 108
24% - 42%
step
stop strobe
109 - 110
43% - 43%
proportional
sequenced pulse effect, fast closing, slow opening
(variable speed pulsing, from slow to fast)
111 - 159
44% - 62%
step
stop strobe
160 - 161
63% - 63%
proportional
random strobe effect with variable speed from slow to fast and
synchronised colours
162 - 207
64% - 81%
step
stop strobe
208 - 209
82% - 82%
proportional
random strobe effect with variable speed from slow to fast and
non-synchronised colours
210 - 255
82% - 100%
no effect
0
- 9
0%
- 4%
automated program 1
10
- 50
4%
- 20%
automated program 2
51
- 91
20% - 36%
automated program 3
92
- 132
36% - 52%
automated program 4
133 - 173
52% - 68%
random program repeat
174 - 214
68% - 84%
repeat all programs in sequence
215 - 255
84% - 100%
5
strobe effect
step
6
Note 1: the second function 2 (A) is enabled when channel 6 is active
Note 2: the second function 3 (A) is enabled when channel 6 is active
automated
functions
decimal
percentage
Pin Lite LED
number 2 Address
DMX 007
is obtained by setting dip-switches
1, 2 & 4 to the ON position
ON
256
auto
test
light on
DR1
1
2
4
8
16
32
64
128
Pin Lite LED
number 1 Address
DMX 001
is obtained by setting dip-switch
1 to the ON position
ON
256
auto
test
light on
DR1
1
2
4
8
16
32
64
128
12
English
Summary of Contents for PIN LITE LED
Page 1: ......
