colr
This function is unavailable.
lamp
This function allows for the on/off control of the lamp via
DMX 512
signal, or for
the permanent on (disenabling DMX control of this function) of the lamp.
1) Press the
menu
button
2) Press the
+
or
-
buttons until
LAMP
(for lamp) is displayed.
3) Press the
enter
button to confirm your selection. The display will show
Strd
(for
standard) which corresponds to the standard configuration whereby the lamp
can be turned on remotely by bringing channel 18 up to 100%, or off at 0%.
4) Press the
+
or
-
buttons until
on
(for on) is displayed. At this setting, the lamp will
remain on regardless of the level set on channel 18.
5) Press the
enter
button to confirm your selection.
test
This function allows for a test sequence to be carried out on the respective motors of
the unit in the absence of any
DMX
signal.
1) Press the
menu
button.
2) Press the
+
or
-
until
tESt
(for test) is displayed.
3) Press the
enter
button to confirm your selection. The display will show
t 01
(for
test number 1). Press the
+
or
-
buttons for each test
t 01
to
t 17
In these tests, the projector simulates the reception of a DMX 512 signal which is
increasing from 1 to 255 on the selected channel.
t 01
= mirror movement in the X-axis
t 02
= mirror movement in the Y-axis
t 03
= opening/closing the dimmer
t 04
= opening/closing the black-out/strobe shutter
t 05
= opening/closing of the iris diaphragm
t 06
= movement of the zoom lenses
t 07
= movement of the focus lenses
t 08
= rotating gobo wheel 1
t 09
= rotating gobos on gobo wheel 1
t 10
= rotating gobo wheel 2
t 11
= rotating gobos on gobo wheel 2
t 12
= rotating the effects wheel
t 13
= rotating the effects on the effects wheel
t 14
= rotating the colour wheel
t 15
= inserting the cyan dichroics
t 16
= inserting the magenta dichroics
t 17
= inserting the yellow dichroics
5) Press the
enter
button to confirm your selection of test to be carried out.
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
