This procedure may be useful in situations where the
iSPOT 575 MB
may need to be switched on and have parameters altered
in an enclosed space, such as in its flight case.
1) Turn on the projector whilst holding down the
enter
,
menu
and
–
buttons simultaneously.
The projector will perform reset of its electronic systems without any motor movement.
2) You may alter the DMX address or any other parameter at this point without any articulated movement.
3) To return to normal operation of the
iSPOT 575 MB
turn the unit off and on via the
power
button, or effect a reset via the
menu system.
The electronic counter should be reset every time a lamp is changed in the projector. so that realistic information about lamp life may
be obtained. Upon turning on the
iSPOT 575 MB
, simultaneously press the
+
and
–
buttons. In this manner, the counter will be
reset.
The procedure has reset the
LIFE
counter.
To verify that the procedure has taken place, undertake the following steps:
1) Press the
menu
button; the projector will show
FUNC
2) Press the
+
or
-
buttons to show
MEAS
.
3) Press the
enter
button
4) Press the
+
or
-
buttons to show
HOUR
(display in hours).
5) Press the
enter
button
6) Press the
+
or
-
buttons to show
LIFE
(for lamp life).
7) Press the
enter
button, the display will show
0000
confirming that the counter has been reset.
N.B. You may verify that the other counters
LIFS
(for total lamp life of all lamps utilised) and
UNIT
(operating life of the projector)
have not been reset.
An encoder system based on 4 position indicators allows the
iSPOT 575 MB
to return to its correct position if it is accidentally
moved during operation.
This is particularly useful if the projector is to be mounted on the floor in a position where the performer or artist may accidentally
bump the unit.
NOTE
: this function may be disabled (display panel function
OPTO OFF
).
O N
sensori attivi
O F F
sensori scollegati
☞
enter
☞
+
o
–
☞
+
o
–
☞
enter
☞
enter
AOO1
FUNC
☞
+
o
–
O P T O
disattiva il ritorno in posizione automatico
Il proiettore ritorna in posizione se toccato accidentalmente,
oppure la funzione viene disabilitata. Il proiettore esegue un
reset meccanico (opto OFF).
☞
enter
☞
menu
16. Automatic repositioning feature
m
en
u
m
enu
en
ter
en
te
r
+
+
15.
Resetting the counters
m
en
u
m
enu
en
ter
en
te
r
+
+
14.
Turning on the iSPOT 575 MB without articulated movement
20
English
Summary of Contents for iSPOT 585 MB
Page 2: ......
