4) Replace the lampholder assembly and the 4 screws removed in step 1.(see Fig.1)
The projector may operate at voltages including 208, 230 or 240 V.
Coemar
presets (barring specific requests) an operating voltage of
240v.
The preset voltage is indicated on a sticker located on the base of the projector power on/off switch as shown in the diagram below.
ISPOT 1200 EB
may operate at either 50 or 60 Hz without any changes required.
selecting an operating voltage different to the factory preset
If the preset operating voltage does not correspond with the voltage in use in the country in which the projector is to operate, it is
possible to alter the operating voltage of the projector at any time. See section
20. Altering the operating voltage
An error in voltage selection may cause serious damage to the projector.
208V
230V
240V
50Hz
60Hz
T10A
Power
T10A
T 3A
factory set
main at:
5. Operating voltage
7
Summary of Contents for ISPOT 1200 EB
Page 2: ......
