The projector may operate at voltages including 208, 230 or 240 V.
coemar
presets (barring specific requests) a voltage of 240v.
The preset voltage is indicated on a sticker located on the base of the projector near the position of the voltage selector switch.
CF 7 H
ard
E
dge
X
may operate at either 50 or 60 Hz without any changes required.
selecting an operating voltage different to the factory preset
It is possible to alter the operating voltage of the projector at any time, by using the selector located on the base of the pro-
jector.
The selector allows you to choose from 2 preset voltages indicated on the sticker located adjacent to the switch.
Select the required voltage by simply sliding the switch to the correct position.
Should you wish to operate the projector at a voltage other than those indicated on the selector switch, contact your autho-
rised
coemar
service centre. This procedure should only be carried out by qualified service personnel.
main setting
208V
230V 240V
main setting
208V
230V 240V
Selettore in
posizione 240 V
Selettore in
posizione 208 V
5. Operating voltage and frequency
English
