mounting
CF 7 H
ard
E
dge
X
may be either floor or ceiling mounted.
For floor mounting installations, the
CF 7 H
ard
E
dge
X
is provided
with four rubber mounting feet.
For ceiling mounted installations we suggest to use appropriate clamps
or fixings to attach the fixture to the mounting surface.
The structure from which the unit is hung should be of sufficient rating to
hold the weight of the unit, as should any clamps used to hang the unit.
The structure should also be sufficiently rigid so as not to move or
shake whilst the
CF 7 H
ard
E
dge
X
moves during its operation.
protection against liquids
The projector contains electric and electronic components that must not come into contact with water, oil, or any other liquid.
movement
The projector has a maximum movement of 630° in the base and 260° in the yoke;
DO NOT
place any obstructions in the
path of the projector’s movement.
safety chain
The use of a safety chain (cod. 069) - fixed to the
CF 7 H
ard
E
dge
X
and to the primary suspension point, is highly recom-
mended to protect against accidental failure, however unlikely, of the primary suspension point.
If using an after-market safety chain not manufactured by
coemar
, ensure that it is of sufficient rating to hold the weight of
the fixture.
risk of fire
Each fixture produces heat and must be installed in a well-ventilated position. The minimum recommended distance from
flammable material is: 0.5m. Minimum distance from the object being illuminated is: 2 m.
490mm
n
°
2 fori/holes
ø 14mm
6. Installation
English
