Whitecroft Lighting Limited
Burlington Street, Ashton-under-Lyne, Lancashire OL7 0AX
Tel44 (0)161 330 6811 Facsimile: +44 (0)161 331 5855
Registered No. 3848973 England Registered Office: As above
October 2019 - Rev D
Concert
EX1S OR3
PK-LEAFLETFEXOR3S
SPECIFICATION
Lamp type
LED
Finish
RAL 9003(White) / Anodised Aluminium
Materials
Mild Steel / Aluminium
Weight
Max = 2kg
Supply
220-240V AC, 50/60Hz
Operating temp
0-30C
v
Connection
2.5mm
²
input terminal block
Ingress protection
IP20
GENERAL INFORMATION
1) A qualified electrician, in accordance with IEE wiring regulations should carry out
connection to mains wiring.
2) This unit must be EARTHED.
3) Ensure that the rated voltage and frequency requirements are compatible with the
available mains supply.
4) Cleaning of reflectors and lenses should be carried out using clean, soft and lint
free cloths and anti-static cleaning fluid
5) Do not carry out high voltage insulation test, i.e. 500/1000v this may damage
internal components.
6) Observe ESD precautions during installation.
Installation Instruction
TECHNICAL SUPPORT
Telephone: 0161 330 6811
Email: [email protected]
http://whitecroftlighting.com/
These units are available with a simple Self-test feature. If fitted this circuit will carry
out function checks once per month and indicate any problems with the battery or
circuit.
EX1SM & EX1RM luminaires use long life LED’s to illuminate the sign legend. There
are no customer serviceable parts. They are designed to last for 5 years after which
time they should be sent for recycling and replaced with a new unit.
The legends are fitted via four thumb-screws. Therefore legends can be easily be
changed when the luminaire is installed.
Please note: These luminaires are a component part of a Lighting Control system that
requires both additional equipment as well as programming. The maximum distance
between fittings or a Bluetooth gateway is 8 metres. For full details please contact
Whitecroft technical support.