39
2012 Audiovox Electronics Corporation. All rights reserved.
8 - Crank Time:
Preset output times for the PURPLE starter wire.
9 - Gas / Diesel:
Selects engine type and delay time for the starter output wire
during remote start activation.
Gas - Gasoline engine, no delay for the starter output wire.
10 Second Delay - Diesel engine, delays the starter output wire for 10
seconds after the ignition has been powered up by the remote start.
15 Second Delay - Diesel engine, delays the starter output wire for 15
seconds after the ignition has been powered up by the remote start.
20 Second Delay - Diesel engine, delays the starter output wire for 20
seconds after the ignition has been powered up by the remote start.
45 Second Delay - Diesel engine, delays the starter output wire for 45
seconds after the ignition has been powered up by the remote start.
Programmable Delay 1 - 60 Seconds - Once selecting this option, grounding
the wait-to-start input between 1 and 60 seconds will program the delay for
the period of time the input was grounded.
10 - Transponder Bypass:
Controls the BLACK ( - ) output wire on the 2 pin
transponder output harness.
While RS is ON - Negative output from time of remote start activation until
remote start shutdown.
During Start - Negative output during crank when remote start is
activated.
Until IGN OFF - Negative output from time of remote start activation until
ignition is turned off (will stay active during key takeover until ignition is
turned off).
11 - Temp Controlled Start:
Allows remote start activation once the ambient
temperature reaches the preset threshold of 0 degrees Fahrenheit. Requires the
feature be set to ON and will only operate when activated from the transmitter.
Refer to owners manual for temperature controlled start operation.
OFF - Temperature will not activate remote start.
ON - Once activated by the transmitter, allows remote start activation once
the ambient temperature reaches the preset threshold of 0 degrees
Fahrenheit.
12 - Single / Double Pulse Start:
Switches the remote start activation between a
single or double press from the transmitter. Note this will not effect the shutdown
procedure.
