background image

19

Plan duration: 3 Years from the date of installation.
Plan amount: Maximum allowable value equal to insurance deductible
or up to $2,500 whichever is less.

Conditions of the Theft Protection Program:

1.

The Theft Protection Program is non-transferable and non-assignable.

2.

The system must be installed by an authorized CODE dealer.

3.

Vehicle must be less than three (3) model years old at the time of
installation.

4.

The security system must have been fully armed at the time of the vehicle
theft.

5.

The vehicle in which the system is installed must be insured for theft by a
licensed insurance underwriter in the state in which the vehicle is
registered.

Terms of payment:

1.

The vehicle must first be considered a total loss due to theft by your
insurance company.

2.

Your insurance company has settled all claims arising from this theft and
there are no other pending legal actions as a result of this theft.

How to file a request for payment:

If the above conditions are met, make your request for payment by submitting
the following to CODE. The request for payment must be received by CODE no
later than sixty (60) days after the vehicle is reported stolen.
1.

Copy of the retail sales receipt for the purchase of the security system,
clearing showing the model of system purchased and the year, make and
model of the vehicle in which the system was installed.

2.

A copy of the police report for the stolen vehicle.

3.

A copy of the paid insurance claim and reimbursement check from the
insurance company.

*The Theft Protection program is not available in all states please
contact   dealer for more information.

CODE SYSTEMS, INC.

1-800-421-3209

Code System, Inc. Theft Protection Guarantee

The Theft Protection Program is designed to provide the retail pur-
chaser of a security system provided by CODE-ALARM, INC. (“CODE”)
an additional benefit, at no additional cost to the purchaser, should
their vehicle be stolen while protected by a CODE-ALARM security
system. While CODE has created this program as a way of showing
appreciation to its customers, CODE RESERVES THE RIGHT TO
UNILATERALLY CHANGE, ALTER, MODIFY, OR DISCONTINUE ALL
OR PART OF THIS THEFT PROTECTION PROGRAM WITHOUT
PRIOR NOTICE. THIS THEFT PROTECTION PROGRAM IS NOT AN
INSURANCE POLICY AND SHOULD NOT REPLACE AN AUTOMO-
BILE OR HOMEOWNERS INSURANCE POLICY. THIS THEFT PRO-
TECTION PROGRAM DOES NOT COVER LOSSES ARISING FROM
THE THEFT OF ITEMS WITHIN THE AUTOMOBILE OR ANY DAM-
AGES ARISING FROM, RELEATED TO, AND/OR INCIDENTAL OR A
CONSEQUENCE OF A VEHICLE THEFT EXCEPT AS SPECIFICALLY
DELINEATED BELOW.

ca-640 owners.pmd

9/9/2004, 4:19 PM

19

Summary of Contents for CA-640





















Reviews: