Prestige APS-922E Owner'S Manual Download

Page: 1 / 24

128-9363

1 of 24

Page 1

Model APS-922E

Owners Guide

2 Way LCD Vehicle Security

& Remote Start System

PATENTED: www.voxxintl.com/company/patents

FCC COMPLIANCE

This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including any interference that may cause undesired

operation.

Warning!

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifica

tions to this equipment. Such modifications could void the user’s authority to operate the equipment

Table Of Content:

Features and Options

Page 2-3

Arming The System

Page 4

Protection While The System Is Armed

Page 5

Disarming Your System

Page 5-6

Intrusion Warning Signals

Page 6

Valet Override, Programming & Safety Control Switch

Page 7

Programming Custom Code Override

Page 7-8

Eliminating the Normal Arm/Disarm Chirps

Page 9

Remote Panic Operation

Page 9

Remote Control Shock Sensor Selection

Page 9-10

Push Button LED Receiver Control Switch

Page 10-11

Remote Starting Your Vehicle

Page 11-12

Automatic Start Timer Operation

Page 12

Optional Device Channel

Page 12-13

Turbo Timer Mode Operation

Page 13

Two Way Remote (Transceiver) Screen Icons & Indications Page 14-15
Two Way Remote Features & Functions

Page 16-18

24 Hour Time Start Setup, Operation, & Use

Page 18

Functions At A Glance

Page 19

Two Way Remote Function Program Chart

Page 20

Replacement or Additional Transmitter Programming

Page 21

Summary of Contents for APS-922E

























Search results

Summary of Contents for APS-922E

Reviews:

Related manuals for APS-922E

Brands by name

Popular brands

Prestige APS-922E, Owner'S Manual

Search results

Summary of Contents for APS-922E

Reviews:

Related manuals for APS-922E

Brands by name

Popular brands