I
NSTALLING
THE
TRANSCEIVER
O
VERVIEW
OF
MOBILE
STATIONS
Envoy™ Transceiver Getting Started Guide
83
Mounting the speaker
To mount the speaker:
1
Secure the mounting cradle to the surface with at least two
screws.
Ensure there is sufficient space at the rear for the cable.
1
Attach the speaker to the cradle with the two screws and
rubber washers.
Mounting the handset and speaker connector
To mount the handset and speaker connector:
1
Use cable ties or screws to secure the handset and speaker
connector in a suitable location.
Mounting the RF unit
CAUTION:
If you are transferring a fixed station to a mobile
station and you have installed rubber feet to the
bottom of the RF unit, you must remove the
rubber feet before installing it into the mounting
cradle.
To mount the RF unit:
1
Secure the mounting cradle to the surface with at least four
screws, one in each corner of the cradle.
NOTE:
Ensure there is sufficient space at the rear
of the cradle to clear the RF unit heatsink.
1
If the key is locked to the base of the cradle, flip the key
away from the base until it can be rotated (see
),
then rotate the key in a counterclockwise direction.