O
PERATING
THE
TRANSCEIVER
S
ETTING
THE
DATE
AND
TIME
E
NVOY
™ T
RANSCEIVER
G
ETTING
S
TARTED
G
UIDE
57
Setting the date and time
The transceiver is set to UTC time in the factory. You set the local
time and time zone offset for the location of the control point. This
feature is useful if you have a network that spreads over several
time zones, or you need to time stamp your transmissions
according to the current time at longitude zero.
To set the time and date:
1
From the main menu, select
(
General
), then
(
Time
and Date
).
1
Press
(
Set
).
1
Press
to move to the
Time Zone
entry.
1
Press or to select the time zone that you want to use.
1
Press
to move to the
Daylight Saving
entry.
1
Press or to select the time that you want to use.
1
Press
to move to the
Local Time
entry.
1
Press to enter edit mode for the local time.
1
Press
or
to scroll to the value that you want to set, then
press to move to the next item.
1
Repeat this for minutes, seconds and AM/PM values.
1
Press
(
Save
) to save the local time.
1
Press
to move to the
Local Date
entry.
1
Press to enter edit mode for the local date.
1
Press
or
to scroll to the value that you want to set, then
press to move to the next item.
1
Repeat this for the day/month and year, as required.
1
Press
(
Save
) to save the local date.
1
Press
to move to the
Clock
entry.
1
Press or to select the type of clock that you want to use.
1
Press
to move to the
Time Format
entry.
1
Press or to select the format that you want to use.
