Codan Envoy 2220 Getting Started Manual Download

Page: 61 / 115

PERATING

THE

TRANSCEIVER

CHANNEL

SCREEN

NVOY

™ T

RANSCEIVER

ETTING

TARTED

UIDE

Selecting a channel

To select a channel:

Press PTT to exit to the channel or scanning screen.

If the transceiver is scanning, press

SCAN

to switch off

scanning.

Press

to scroll through the channels.

Stop scrolling when the channel that you want is shown on
the screen.

The channel is selected.

NOTE:

If you want to change the sideband, press

MODE

. If the mode does not change there

is only one mode for the channel.

NOTE:

If you have an automatic antenna tuner
fitted, press PTT to tune the antenna to the
currently selected channel.

Do any of the following:

•

Hold

to edit the channel, if permitted.

•

Press

to search for a channel.

•

Press

CALL

to start a call.

•

Hold

CALL

to go to Contacts.

Summary of Contents for Envoy 2220




















































































































Search results

Summary of Contents for Envoy 2220

Reviews:

Related manuals for Envoy 2220

Brands by name

Popular brands

Codan Envoy 2220, Getting Started Manual

Search results

Summary of Contents for Envoy 2220

Reviews:

Related manuals for Envoy 2220

Brands by name

Popular brands