EN
G
LI
S
H
7
1
2
3
4
5
6
7
8
Description
1. Front handle
2. Ventilation ports
3. Speed regulator
4. Power switch 1 on – 0 off
5. Rear handle
6. Power lead with plug
7. Backing pad Ø 95 mm (2 ×)
8. Polishing sponges (2 ×) (sold separately)
Before use
• Make sure that the polishing sponges (8) are securely attached to the backing pads.
• Make sure that the backing pads can be turned by hand.
Operating instructions
Note:
Polishing sponges must be used for polishing and are sold separately
(recommended size Ø 100 × 25 mm with hook-and-loop backing).
Polishing bonnets with drawstrings are not recommended, but if you are using one:
Do not allow any loose portion of the polishing bonnet or its attachment strings to spin freely.
