1300 663 907
Model Number
HE160972
After Sales Support
20
OTHER FUNCTIONS
6.1 Auto Trim Function (Mode1/Mode 2)
Push both left and right throttles down towards the left
at a 45-degree angle as indicated in the diagram for
10 seconds. When the light on the PC board of the Sky
Scanner is flashing rapidly, release the throttles and the
light on the PC board will remain lit, indicating auto trim is
complete.
6.2 Speed Function
Press the Speed button to toggle low and high speed modes. It is recommended you
only fly in the default low speed mode until you are confident in your abilities. More
speed means bigger crashes. This can result in damage to the Quadcopter. Damage
through incorrect use and poor control will void your warranty.
NOTE:
When changing speed modes, one beep on the Remote indicates you have selected the slowest
speed, two beeps indicate medium speed, and three beeps indicate highest speed selected.
6.3 Auto Land Function
Press the Headless Mode/Auto Land Button to lower your Sky Scanner to the ground
from its current location. When it reaches the ground, it is recommended you take
control but pushing the left throttle all the way down, making slight corrections as
needed until the propellers slow and come to a stop.
6.4 Headless Mode
To activate Headless Mode on your Sky Scanner, press and hold
the Headless Mode/Auto Land Button until the Remote Control
beep once.
When Headless Mode is activated, the LED lights on the Sky
Scanner will stop flashing once it has taken off. The Sky Scanner
will automatically set the side moving forward as the front
direction for Headless Mode.
NOTE:
To deactivate Headless Mode, repeat the step above
