1300 663 907
Model Number
HE160972
After Sales Support
12
OPERATION
3.1 Pairing the Sky Scanner to the Remote Control
a.
Turn the Sky Scanner power switch to ON and place on a flat surface. The LEDs
will flash indicating it is in pairing mode
b.
Press the power button on the remote control until you hear a beep. The LED light
on the remote control will be flashing red, indicating it is in pairing mode
c.
Push the left throttle all the way up and then all the way down to pair. You will
hear 2 beeps and the lights on the Remote Control and Sky Scanner will remain
lit, indicating they are successfully paired
3.2 Unlocking Flight Controls
a.
To unlock flight controls, push both the left and right throttles down and away from
each other as shown in the image
TIP:
You can also lock and unlock flight controls by moving both throttles down and in at a 45-degree angle
towards the power button
