
1300 663 907
Model Number
HE160972
After Sales Support
10
INSTALLATION
2.1 Installing the Control Batteries
a.
Remove the battery cover
b.
Install the 6 included AA batteries into the back
of the remote control, taking note of the polarity
positions indicated
c.
Replace the cover
2.2 Charging the Sky Scanner HD Quadcopter Battery
a.
Connect the rechargeable battery to the
Balance Charger
b.
Connect the Power Adaptor to the Balance
Charger
c.
Plug the Power Adaptor into a mains outlet
and turn the power on
d.
Charge for 3 hours on first charge and then remove the battery
2.3 Installing the Propellers
a.
Placed the propellers labelled A1 and B1 on the corresponding Sky Scanner rods
labelled A or B
IMPORTANT NOTE:
If you do not place the correct letter propeller on the corresponding letter rod, your
quadcopter will not fly correctly. There is no difference between the A1/A2 or B1/B2 propellers, the number
is for reference only
b.
Place the white plastic cap through each rod as
indicated in the diagram (upside down)
c.
Place a pin through the hole of each metal rod
d.
Pull the white cap upwards so the pin is sitting in the
cavity of the white cap
e.
Twist the cap till you hear a ‘click’ to ensure the pin is
locked and secured into the groove of the white cap
f.
Place the silver cap onto the metal rod and push down
while turning clockwise to secure
Battery cover
6 X 1.5V AA batteries
Charger
Balance
Charger
a
b
c
d
e