4
After Sales Support
1300 663 907
Model Number
HE150277
02/2016
Important Safety Instructions
Before you get started, please read these important safety instructions.
Caution:
The Cocoon Create 3D Pen generates high temperatures at the nozzle that can
cause injury. Do not touch the tip of the 3D Pen nozzle while operating, and allow time for
the nozzle to cool down after operation.
Vapours/fumes may be irritating at operating temperatures. Always use the
Cocoon Create 3D Pen in an open, well ventilated area
Do not leave the Cocoon Create 3D Pen unattended during operation
Contact with extruded material may cause burns. Wait for extruded material to
cool before touching the object
Use the Cocoon Create 3D Pen on a heat-resistant flat surface as the device is
hot during operation. Do not place the 3D Pen on any type of fabric or flammable
material at any time
•
The 3D Pen must not be exposed to water or rain, or damage will occur
•
Do not attempt to modify the internal components of the 3D Pen, or disassemble the
device under any circumstances
•
Do not use the 3D Pen if damage of housing or cables are evident
• In case of emergency, turn off the 3D Pen at the power outlet
• When not in use, eject plastic filament from 3D Pen to prevent building up of residual
filament inside the 3D Pen
•
Unplug the 3D Pen and adaptor and store in a cool dry place, keep out of reach of
children
Summary of Contents for HE150277
Page 1: ...INSTRUCTION MANUAL Model Number HE150277 create ...
Page 12: ......
