SAFETY GUARD
Attach the safety guard to the gear case and fix it with the
clampand 2bolls (M5*25) securely. (Figure 11)
(1) Bolt
(2) Clamp
(3) Main pipe
(4) Safety guard
INSTALLING THE METAL BLADE
(Figure 12)
1.Set the inner holder to the gear shaft , and turn to fix with the attached L-shaped bar.
2.Put the blade on the inner holder with letters to the gear case, and match correctly the
hole of the blade to the projection of the inner holder.
3.Set the outer holder to the gear shaft with the hollowed face to the blade.
4.Put the attached bolt cover on the outer holder and secure
it withthe bolt (left screw) together with the spring washer
and thewasher.
(1) Nut
(2) Outer holder 1
(3) Outer holder 2
(4) Blade
(5) Gear shaft
(6) Bar
(7) Inner holder
(8) Gear case
INSTALLING THE NYLON CUTTER(OPTION)
(Figure 13)
1.Set correctly the inner holder and the outer holder th the
gear shaft.
2.Screw the attached bold (M8 Left) into the gear shaft and
secure it with the spanner.
3. Screw the nylon cutter into the bolt by fixing the inner
holder with the L-shaped bar and tighten it manually.
Keep bolls and washers to install the blade carefully so as
not to lose them.
NOTE
(1) Gear Case
(2) Bolt
(3) Nylon cutter
(4) Nylon cord
24
Summary of Contents for MT250C
Page 1: ......
