background image

Intro

Operation

Customer

Assistance

Warranty

Notice

Main Icons

Secondary Icons

Caution

Warning

Installation

Customer

Assistance

International Station License

If your vessel will be entering the sovereign waters of a country other than the U.S.A. or Canada, you 

should contact that country’s communications regulatory authority for licensing information.

Radio Call Sign

Currently, the FCC does not require recreational boaters to have a license. The United States Coast 

Guard recommends that the boat’s registration number and state of registry (e.g., IL 1234 AB) be used 

as a call sign and be clearly visible on the vessel.

Canadian Ship Station License

You need a Radio Operator’s Certificate if your vessel is operated in Canadian waters. Radio Operator 

training and certification is available from the Canadian Power Squadron. Visit their website at http://

www.cps-ecp.ca/

UK requires a ships radio license and a marine radio operators certificate before transmitting equipment can 

be used aboard a vessel. Other European countries have specific requirements of their own.
For detailed information and applications, contact the Royal Mail Licensing Centre in the UK. In other 

countries contact the local equivalent of the UK Royal Mail or the national telecommunications authority.

•  This CobraMarine radio incorporates a VHF FM transceiver designed for use in the frequency range  

  of 156.025 to 163.275 MHz. It requires 6 volts DC and has a switchable RF output power of 0.5, 1  

  or 3 watts.

WARNING

The device complies with RF specifications when the device is used at 25mm from  

your front face and 0mm from your body.

Maximum SAR Value:

0.452 W/Kg (50% duty to face 10g)

0.795 Ww/Kg (50% duty to body 10g)

0.413 W/Kg (50% duty to face 1g)

0.975 W/Kg (50% duty to body 1g)

WARNINGS

Your radio generates electromagnetic RF (radio frequency) energy when it is transmitting. To ensure

that you and those around you are not exposed to excessive amounts of that energy, 

DO NOT

 touch

the antenna when transmitting.

KEEP

 the radio at least two inches (5cm) away from yourself and others when transmitting.

DO NOT 

operate with more than a duty cycle of 5% transmit, 5% receive and 90% standby. The

radio is transmitting when the Talk button is pressed and the transmit information shows on the LCD

screen.

ALWAYS

 use only Cobra authorized accessories.

DO NOT 

operate the radio in an explosive atmosphere, near blasting sites,

or in any area where signs are posted prohibiting radio transmissions.

NEVER

 place the transceiver or microphone/speaker where they might interfere

with operation of your vessel or cause injury.

DO NOT

 allow children or anyone unfamiliar with proper procedures to operate

the radio without supervision.
Failure to observe any of these warnings may cause you to exceed FCC RF exposure limits or create

other dangerous conditions.

Changes or modifications not expressly approved by the party responsible for compliance could void 

the user

'

s authority to operate the equipment

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio 

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1) l’appareil ne doit pas produire de brouillage;
2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible 

d’en compromettre le fonctionnement.”

MARINE_FCC_WARR_INSERT_121218.indd   2-3

1/14/19   8:44 AM

Summary of Contents for MRHH150FLT USA Series























Reviews: