background image

Product Service

 

For any questions about operating or installing this new Cobra product, or if parts are missing…

PLEASE CALL COBRA FIRST

…do not return this product to the store.

If this product should require factory service, please call Cobra first before sending the product.  

This will ensure the fastest turnaround time on any repair. If Cobra asks that the product be sent to its 

factory, the following must be furnished to have the product serviced and returned:

1.

  For Warranty Repair include some form of proof-of-purchase, such as a copy of a sales receipt. 

Make sure the date of purchase and product model number are clearly readable. If the original 

receipt are sent, they cannot be returned;

2.

  Send the entire product;

3.

  Enclose a detailed description of what is happening with the product. Include a typed or clearly 

printed name and address of where the product is to be returned, with phone number (required  

for shipment).

4.

  Pack the product securely to prevent damage in transit. If possible,  

use the original packing material;

5.

  Ship prepaid and insured by way of a traceable carrier such as  

United Parcel Service (UPS) or Priority Mail to avoid loss in transit to: 

 Cobra Factory Service

Cobra Electronics Corporation 

6500 West Cortland Street 

Chicago, Illinois 60707 U.S.A.;

6.

  If the product is in warranty, upon receipt of the product, it will either be repaired or exchanged 

depending on the model. Please allow approximately 3 – 4 weeks before contacting Cobra for 

status. If the product is out of warranty, a letter will automatically be sent out with information as to 

the repair charge or replacement charge.

For any questions, please call 773-889-3087 for assistance.

Specifications (Typical)

 

 

General

 

Number of Channels 

 All U.S., Canadian, International and 

NOAA Weather Channels

  Channel Spacing  

25 kHz

  Modulation 

5 kHz Max.

  Input Voltage 

6.0 VDC

  Battery Life:  

NiMH:     

9.4 hours @ 3 watts 

   

 

20 hours @ 0.5 watts  

  5% TX, 5% RX, 90% Standby 

              

12 hours @ 1 watt  

   

Alkaline:  

26 hours @ 3 watts 

   

              

33 hours @ 1 watt

  Current Drain:   

       Standby 

45 mA 

       Receive (Rx) 

140 mA 

       Transmit (Tx) 

1.1 A @ High Power, 450 mA @ Low Power

  Operating Temperature Range 

-20˚C to 50˚C

  Radio Dimensions 

 4.5” H x 2.7” W x 1.5” D  

(114 mm x 69 mm x 38 mm) not including antenna

  Radio Weight 

0 lbs., 8 oz. (227g.)

 

Receiver

  Frequency Range 

156.050 to 163.275 MHz

  Receiver Type 

Double Conversion Super-Heterodyne

  Sensitivity:   

  12 dB Sinad 

0.25 uV

  Adjacent Channel Selectivity 

70 dB

  Intermodulation and Rejection 

70 dB

  Spurious and Image Rejection 

70 dB

  AF Output 

250 mW @ 8 Ohms

 

Transmitter

  Frequency Range (Tx): 

156.025 to 157.425 MHz

  RF Output Power 

0.5, 1 or 3 watts

  Spurious Emissions 

-60 dB @ High Power, -55 dB @ Low Power

  Microphone Type  

Condenser

  Frequency Stability 

+/-10 ppm

  FM Hum and Noise 

40 dB

Disposal of Old Electrical or Electronics Equipment

 

This product may contain hazardous substances that could impact health  and the environment if not 

disposed of properly.

The crossed out wheeled bin symbol indicates that the product  should not be disposed of 

along with household waste.  It should  be handed over to an applicable collection point for 

the recycling  of electrical equipment. By ensuring that this product is disposed  of correctly 

you will help/prevent potential negative impact on  the environment. 

If you need more information on the collection, reuse and recycling  systems, please contact your local 

civic office or the shop where it was  originally purchased.

MARINE_FCC_WARR_INSERT_121218.indd   8-9

1/14/19   8:44 AM

Summary of Contents for MRHH150FLT USA Series























Reviews: