Electric Head cont.
To evacuate the tank overboard using the macerator, open the valve on the waste discharge thru hull located
through the floor inside the starboard console. See the sanitation diagram for more information. The intake
valve will be fully open when the handle is pointing straight up. The Y- valve handle should then be turned so
that the wide portion of the handle covers the silver arrow for the pump-out outlet (the top outlet.) The visible
arrows should now be showing the flow to be going downward. Next press down the macerator switch on the
panel. This will push the contents in the holding tank out the bottom of the boat through the waste discharge
thru hull. Once the process is complete it is advisable to close the discharge valve and put the Y- valve handle
back into the pump-out position. (The wide portion of the handle covering the down arrow.) See picture and
diagrams above on page 29.
