COBHAM Sailor 6215 VHF DSC User And Installation Manual Download Page 4 | Manualshive

Page: 4 / 102

COBHAM Sailor 6215 VHF DSC User And Installation Manual Download Page 4

ii

Disclaimer

Any responsibility or liability for loss or damage in connection with the use of
this product and the accompanying documentation is disclaimed by Thrane &
Thrane A/S. The information in this manual is provided for information
purposes only, is subject to change without notice and may contain errors or
inaccuracies. Manuals issued by Thrane & Thrane A/S are periodically revised
and updated. Anyone relying on this information should acquire the most
current version e.g. from

www.cobham.com/satcom

or from the distributor

.

Thrane & Thrane A/S is not responsible for the content or accuracy of any
translations or reproductions, in whole or in part, of this manual from any
other source.

Thrane & Thrane A/S is trading as Cobham SATCOM.

Copyright

© 2013 Thrane & Thran3 A/S. All rights reserved. Printed in Denmark.

Trademark Acknowledgements

•

SAILOR

is a registered trademarks of Thrane & Thrane A/S.

• Other product and company names mentioned in this manual may be

trademarks or trade names of their respective owners.

«
...
2
3
4
5
6
...
»

Summary of Contents for Sailor 6215 VHF DSC







































































































Reviews:

No comments