COBHAM Sailor 6215 VHF DSC, User And Installation Manual, Page: 25 / 102

Chapter 2: Operation
VHF radio communication 15
22222
Operation
Programming a call channel
To program a call channel (or quick selection), do as follows:
1. Make an extra-long press (2.5 s duration) on the
16/C
key.
2. Press the soft key
CALL CH
. The channel designator is
flashing.
3. Turn the selector wheel knob to select the desired channel.
4. Press the soft key
OK
to confirm the new call channel and
leave edit mode.
Naming a channel
To name a channel, do as follows:
1. Make an extra long press on the
16/C
key until
NAME
is
shown in the display next to one of the soft keys.
2. Turn the selector wheel knob to select the channel you want to name.
3. Press the soft key
NAME
.
4. Turn and press the selector wheel knob to enter the name,
letter by letter. Press
BACK
to move one character to the left.
Press
CLEAR
to the delete the current character and the
following characters. A long press on CLEAR deletes all
characters.
5. Press the soft key
OK
to confirm the entered
value and to leave edit mode.
6. Press
EXIT
to return to return to the standard
VHF display.