DIGIMINI AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless
–
Coverage
Date: 6-Jul-17
www.cobham.com/wireless
Document number: 00031UM
Rev. 6.3
Page |
1-5
The following table provides a description of the front panel LED indicators (see
6.2.2 for more info).
LED
Description
Band specific LED
(e.g. 850, 1900, etc)
Downlink path status and RSSI indication:
MNG
Relevant only if connected to DMCU:
CCD Operation status
MODEM
Relevant only if connected to DMCU:
DMCU Modem operation status
1.6.2 Side Panel Interfaces
The DIGImini side panel supports the DMCU interfaces and the side bolts used for hanging the unit on the
wall bracket. For DMCU interfaces descriptions refer to the DMCU User Manual.
Figure 1-3. DIGImini Side Panel
Side Connector
Description
Modem
DMCU Modem Antenna connection - relevant for installation with
a DMCU.
RS485
RS485 connection to DMCU option.
1.6.3 DIGImini Power Supply
The power supply requires assembly only during an upgrade procedure from a dual-band to a triple-band or
quad-band solutions in which two DIGImini units are cascaded. Otherwise, it is preassembled.
Figure 1-4: Repeater Power Supply
Connect to 110/240
VAC power source
Connect to Front
panel DC power
(12V) connector
DMCU Antenna
connection
DMCU RS485
connection
