DIGIMINI AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless
–
Coverage
Date: 6-Jul-17
www.cobham.com/wireless
Document number: 00031UM
Rev. 6.3
Page |
4-2
4.2 View of the Dual Unit Installation
The following figure illustrates the Quad-band DIGI-mini assembly.
The following figure illustrates the Triple/Quad-band DIGI-mini assembly.
Note the following:
•
The Tri/Quad-band assembly supports
two RF combiners, mounted on each side bracket.
•
The front panel LED interfaces are interconnected and covered with a common tab.
NOTE: Illustration below shows a bottom view of the mounted Quad-band assembly (connectors face down
when the assembly is wall mounted).
Figure 4-1: Cascaded DIGImini Tri/Quad-band
4.3 Required Tools and Materials
The following is required in order to install the Repeater:
•
Standard professional tool box
•
A computer (i.e. laptop for running the setup) – refer to the single/dual band user manual for setup and
commissioning procedure.
DIGImini Unit
Combiner- one on
each side
Power Supply –
one on each side
Cascading
Bracket – on
each side
DIGImini Unit
Common
indicators
Wall bracket
Spacer between
Combiner and bracket
