BBG-1300-OM (V1.0)
BBG-1300-FR PRODUCT MANUAL
2-21
Installation and Setup
Setting Up Network Remote Control
Provides controls for BBG-1300-FR caching of user card
parameters that can enhance
DashBoard-to-BBG-1300-FR connection speed using
enumerated parameter list caching
• Parameter Caching Mode Select
Selects caching mode as follows:
• Disabled – no caching; all queries always go thru CAN bus to cards.
• Enabled without enumeration– caching is performed, but an enumerated
list is not written.
• Enabled with enumeration; cards immediately visible– caching is
performed and enumerated list is written. BBG-1300-FR and card presence
is visible even for cards not fully enumerated. (This setting provides fastest
rendering of BBG-1300-FR and cards in DashBoard and is the
recommended default setting.) Enumeration list shows write-to-list status.
• Enabled with enumeration; cards hidden until enumerated– similar to
above, but waits until cards are fully enumerated before displaying a card.
Note: All known instances of Cobalt openGear
®
cards support parameter
caching. If card will not appear, set Parameter Caching to Disabled. This
mode is the same as previous BBG-1300-FR function.
Table 2-1
BBG-1300-FR Setup and Auxiliary Control Descriptions — continued
With user cards enumerated by BBG-1300-FR,
DashBoard instances query for card presence with
communication between only the BBG-1300-FR and
DashBoard instances. The BBG-1300-FR internal
CAN bus is not queried, greatly speeding-up frame
reporting and card presence to DashBoard instances.
Cache is updated if card parameters change.
Without user cards enumeration, DashBoard
instances must query for card presence using
communication between the BBG-1300-FR and
DashBoard instances, and additionally then the
BBG-1300-FR and the frame internal CAN bus. This
can cause longer delays in frame connection
(especially when many DashBoard instances are
trying to query the same frame).
Summary of Contents for BBG-1300-FR
Page 45: ......