BBG-1300-OM (V1.0)
BBG-1300-FR PRODUCT MANUAL
2-15
Installation and Setup
Setting Up Network Remote Control
5.
Rotate Navigate/Select knob to select
IP Address
sub-menu.
6.
Press the Navigate/Select knob. A flashing cursor now appears for the
first field of the address. Rotate the knob clockwise or counter-clockwise
to select the desired value.
7.
Press the knob again to move cursor to the next field. Rotate knob to
select desired value.
Note:
Numeric settings such as address fields can be incremented or decremented
by either:
- rotating the Navigate/Select knob CW or CCW, or
- pressing soft key R1 (to increment) or R2 (to decrement).
8.
Repeat until all fields are set as desired. When all fields are set, press the
Navigate/Select knob again to exit field settings (no flashing cursor).
9.
Rotate Navigate/Select knob to select
Mask
sub-menu.
Note:
Typically, default mask setting of 255.255.255.0 is suitable. If default mask is
to be used, simply use Navigate/Select knob to skip past Mask and go to
Gateway sub-menu select (step 11).
Summary of Contents for BBG-1300-FR
Page 45: ......
